170mm silicon carbide fickert abrasive brushes for leather finish on ceramic tile and quartz
Product Video
Product Introduction
These silicon wires are assembled onto the fickert shape plastic plinth by strong adhesive.Working length of silicon wires is 30mm, the silicon carbide grains are evenly distributed on every wires which can polish the ceramic tile and quartz surface equally,remove burr and the soft grains of surface, to achieve uneven antique surface effect.
The edge of plastic plinth is with a unique beveled edge design which we owned the design patent, enables the brushes to be utilized until the last bit is at the bottom,thanks to it’s curve edge, it won’t break the slab surface while brushes are swing left and right.
Application
The fickert abrasive brushes are widely installed on automatic polishing machine like Keda machine,usually 6 pieces as one set. The glossiness of finished slabs is usually within 7 - 12 degree, matte and leather surface effect.
Regular sequence: grit 80# 120# 180# 240# 320# 400# 600# 800# 1000# 1200# 1500#, or we can customize as per clients’ requirement.
Parameter & Feature
• Length 165mm * width 67mm * height 57mm
• Wires length: 30mm
• Main material: 25-28% silicon carbide grain + nylon 610
• Material of plinth: plastic
• Fixing type: adhesive (glued fixing)
• Grit and diameter
Feature: Fickert abrasive brush with wavy silicon wires has good resilience ability which can rebound and polish every places evenly. The strong adhesive can catch the wires to the plastic plinth tightly, guarantee every parts of brushes won’t be fell off when working.
FAQs
Normally there’s no quantity limited, but if for samples testing, we do suggest you take the enough quantity so you can obtain the desired effect.
For examples, our production capacity for abrasive brushes is 8000 pieces per day. If goods are in stock, we will send out within 1-2 days, if out of stock, production time might be 5-7 days, because the new orders have to wait in line, but we will try our best to deliver ASAP.
L140mm Fickert brush: 24 pieces / carton, G.W.: 6.5KG/carton(30x29x18cm)
L170mm Fickert brush: 24 pieces / carton, G.W.: 7.5KG/carton(34.5x29x17.4cm)
Frankfurt brush: 36 pieces / carton, G.W.: 9.5KG/carton(43x28.5x16cm)
Non-woven nylon fiber:
140mm is 36 pieces / carton,G.W.: 5.5KG/carton (30x29x18cm);
170mm is 24 pieces / carton,G.W.: 4.5KG/carton (30x29x18cm);
Terrazzo frankfurt magnesite oxide abrasive : 36 pieces / carton, G.W.: 22kgs / carton (40×28×16.5cm)
Marble frankfurt magnesite oxide abrasive : 36 pieces / carton, G.W.: 19kgs / carton (39×28×16.5cm)
Terrazzo resin bond frankfurt abrasive : 36 pieces / carton, G.W.: 18kgs / carton (40×28×16.5cm)
Marble resin bond frankfurt abrasive : 36 pieces / carton, G.W.: 16kgs / carton (39×28×16.5cm)
Cleaner 01# abrasive : 36 pieces / carton, G.W.: 16kgs / carton (39×28×16.5cm)
5-extra / 10-extra oxalic acid frankfurt abrasive: 36 pieces / carton, G.W.: 22. 5kgs / carton (43×28×16cm)
L140 Lux fickert abrasive: 24 pieces / carton, G.W.: 19kgs / carton ( 41×27×14. 5cm)
L140mm Fickert magnesium abrasive: 24pieces / carton ,G.W.: 20kgs / carton
L170mm Fickert magnesium abrasive: 18 pieces / carton ,G.W.: 19.5kgs / carton
Round brush / abrasive will depend on the quantity , so please confirm with our service.
We accept T/T, Western Union, L/C (30% down payment) against original B/L.
These abrasive tools are consumable commodities, normally we support refund within 3 months if any defective issue(which normally won’t happen). Please make sure keep the abrasive in dry and cool circumstance, in theory, the validity is 2-3 years. We suggest that clients purchase enough consumption for three months of production, rather than stocking too much at one time.
Yes, we can customize the goods as per your drawing, but it will involve mould fee and require bulk quantity. Mould time will takes 30-40 days normally.
Related products
-
L140mm Mat Rubber Brush Airflex texturing Brush...
Product Video Product Introduction The Filiflex and Airflex brushes work on the material digging the softest parts, rounding up and smoothing the hardest ones. For an irregular but at the same time harmoniously wavy and natural-looking surface. Pleasantly irregular to the touch and with a particularly intense color, the final finish can be matte or shiny, more or less irregular, according to the sequence used. The grit of Filiflex brush is from 180# – 3000#. Made with many n...
-
L170mm Antique finishing lapatro brush silicon ...
Product Video Product Introduction The wires in 4 rows are intentionally arranged to effectively direct waste water and residue to drain away with ease. Moreover, our plastic base is made with a unique beveled edge design that enables the brushes to be utilized until the last bit is at the bottom, resulting in less than 2mm of remaining residue. Application The silicon lapatro brushes are installed on continual automatic polishing machine like Keda machine and ...
-
L140mm Fickert silicon abrasive brushes for pol...
Product Video Product Introduction The 4 rows of wires are designed to guide residue and waste water to drain out easily. Additionally, our plastic base has a patented beveled edge design which enables the brushes to be used until the very end, leaving behind less than 2mm of residue. The brushing process involves running the tiles through the machine, with the bristles of the Fickert brush gently abrading the surface of the tile to create a consistent matte finish. The specialize...
-
Non-woven nylon polishing pad fickert fiber gri...
Product Video Product Introduction Non-woven fickert abrasive fiber grinding block is very flexible, which means it can easily adapt to the shape of the surface being polished. Besides, abrasive fiber is impregnated with abrasive material (diamond abrasive and silicon abrasive) that are easy to remove scratch and enhance glossiness which can achieve soft light or glossy surface. The non-woven fabric used in the pad does not trap dirt and debris,so it can clean and polish the stone...
